Petro-Canada Lubricants small engine oil is designed to give excellent performance in air-cooled, two-strokes per cycle engines operating under all conditions. This oil is especially formulated for use in oil injection as well as conventional pre-mixed gasoline/oil lubricated two-stroke engines.
Petro-Canada Lubricants small engine oil contains high performance additives, which give excellent anti-scuff and anti-wear performance to ensure reliability, internal cleanliness and long engine life. The additive system used produces minimal spark plug, ring, piston and valve deposits allowing for good starting and continued efficient engine operation.
Petro-Canada Lubricants small engine oil also contains special rust inhibitors with a high film strength, which protect engines against rust during use and in storage.
Basic manufacturers’ recommendations should be followed so as to obtain maximum protection during prolonged storage. Care should be taken not to mix two-stroke oils from different manufacturers.
Petro-Canada SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil is a premium synthetic blend, low ash, two-strokes per cycle engine oil for use in many conventional pre-mix fuel/oil, as well as oil injection lubricated engines.
Petro-Canada SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil is certified against JASO FC and meets the requirements of ISO-L-EGC and API TC.
It is designed to lubricate air-cooled, 2-stroke engines in motorcycles, mopeds, snowmobiles, chain saws, generators, lawn mowers, weed trimmers and other landscaping equipment. It is suitable for use in oil injection and premixed lubricated engines at gasoline/oil ratios up to 100:1.
It is recommended for use in air-cooled, 2-stroke snowmobiles including those manufactured by (and more): Bombardier, Arctic Cat, Polaris and Yamaha.
It is recommended for use in 2-stroke lawn maintenance/ forestry equipment including those manufactured by:
It is recommended for use in 2-stroke small cc motorcycles and scooters including those manufactured by (and more):
SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil has the following features:
Controls deposit formation, ring-sticking and prevents exhaust-port plugging
Superior anti-wear and anti-scuff protection
Minimizes spark plug fouling and engine preignition
Provides excellent protection against rust and corrosion
Mixes easily with gasoline and pumps readily down to -40 °C/°F
Formulated for oil injection as well as premixed gasoline/oil lubricated engines
Keeps smoke emissions low when used at recommended gasoline/oil ratios
Dyed blue-green for easy detection of gasoline/oil mixtures
SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil is suitable for use against API Classification TC, TISI, ISO-L-EGC, SAE Fluidity/Miscibility (F/M) Grade 4 and JASO FA, FB and is certified against JASO FC (PCL 694 and PCL 695).
Typical characteristics are shown below:
SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil |
|
---|---|
Viscosity, cSt @ 40°C |
34.7 |
Viscosity, cSt @ 100°C |
6.8 |
Viscosity Index |
158 |
Flash Point, COC, °C/°F |
151/304 |
Pour Point, °C/°F |
-51/-60 |
Brookfield Viscosity, cP @ °C |
14,490@ -40 |
Sulphated Ash, % Wt |
0.10 |
Color |
Blue/Green |
Suitable Performance Level |
API TC |
SAE F/M Grade 4 |
|
JASO FA, FB and FC |
|
ISO-L-EGC |
|
TISI |
QUICK MIX CHART Quantity of Oil per Container of Gasoline† |
||||||
---|---|---|---|---|---|---|
Container Volume |
5 L |
10 L |
25 L |
1 Gal |
2 Gal |
5 Gal |
Gasoline to Oil Ratio |
mL of Oil |
mL of Oil |
mL of Oil |
oz of Oil |
oz of Oil |
oz of Oil |
16:1 |
315 |
625 |
1560 |
8.0 |
16.0 |
40.0 |
24:1 |
210 |
415 |
1040 |
5.5 |
10.5 |
26.5 |
32:1 |
155 |
315 |
780 |
4.0 |
8.0 |
20.0 |
50:1 |
100 |
200 |
500 |
2.5 |
5.0 |
13.0 |
100:1 |
50 |
100 |
250 |
1.5 |
2.5 |
6.5 |
†All units are measured by metric and US standards.